ISO 20344 17707 Finished Shoe Bending Angle Testing Machine Shoes Bending Resistance Tester
Introduction
The finished shoe bending angle testing machine is used for testing the bending resistance performance of finished shoes. By inspecting the force value required when the sample shoe is bent to a certain angle or the angle reached when a certain force is applied, the bending resistance performance of the sample shoe material is evaluated. It adopts a high-precision decoder to accurately read the angle value and has a quick return function.
Product Features
It can precisely display the force value, and is easy and convenient to operate. It is an essential device for many shoe factories and quality inspection units.
Experimental Principle
The fixture holds the front part of the shoe (confirming the 1/3 of the forefoot, located at the position of the rotating shaft). After the motor starts, it drives the pulley, causing the rotating shaft to drive the rotating plate to apply a force of 30N to the shoe at a speed of 100mm/min for testing. A decoder is installed at the rotating shaft to sense the angle of the rotating plate and display the value through the monitor.
Sampling requirements: Finished shoes
Result determination: Fixed force shows angle, fixed angle shows force.
Meet the standards
Compliant with standards such as ISO-20344, ISO 17707-2005, GB/T20991-2007, ISO 20344:2011, and QB 2885-2007.
Technical specifications
|
Capacity
|
500N
|
|
Bending Speed
|
100 mm/min (linear speed)
|
|
Force Resolution
|
1/10000
|
|
Test Speed
|
100 ± 10 mm/min (adjustable)
|
|
Arm Length
|
315mm
|
|
Bending Position
|
One-third of the finished shoe
|
|
Angle Accuracy
|
0.1 degree
|
|
Motor
|
Servo motor
|
|
Measurement Mode
|
Fixed force display angle / Fixed angle display force
|
|
Volume
|
75*45*65 cm
|
|
Weight
|
55 kg
|
|
Power Supply
|
AC 220V 50Hz
|
|
|
ISO 20344 17707 Finished Shoe Bending Angle Testing Machine Shoes Bending Resistance Tester Images
|
